Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CAPROWAX P™ 6006-C65-BM42100 - Polyester-MX - Albrecht Dinkelaker

Material Data Center offers the following functions for CAPROWAX P™ 6006-C65-BM42100:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Caprowax P datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
기계적 특성값단위시험규격
ISO 데이터
쇼어 D 경도 52 - ISO 7619-1
열적 특성값단위시험규격
ISO 데이터
비카트 연화 온도, A 54 °C ISO 306
기타 특성값단위시험규격
밀도 1200 kg/m³ ISO 1183
Processing Recommendation Extrusion값단위시험규격
Pre-drying - Temperature 48 - 50 °C -
Pre-drying - Time 12 h -
Feed temperature 50 - 60 °C -
Zone 1 100 - 160 °C -
Nozzle temperature 90 - 120 °C -
특징
생산 공정
사출 성형, 필름 압출, 중공 성형, 열성형
인도 유형
펠렛 (입자,알갱이)
Certifications
Contains renewable resources, Biodegradable, 퇴비화 가능 ISO 13432 (생산자)
응용
포장
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.